Dongguan Deyi Machinery Co., Ltd
Home>Products>Five star motor M8
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13922901799
  • Address
    No. 138, Yangkengtang Yangxin 1st District, Dalang Town, Dongguan City
Contact Now
Five star motor M8
Five star motor M8
Product details

Five star motor M8 product picture:

Five star motor M8 technical parameters:
Model (Type) displacement Torque (N.m) Pressure (MPa) speed range weight
(ml/r) Torque(Rated) Theoretical torque per unit(N.m/MPa) Rated pressure(Rated) Maximum pressure(Max) (r/min) (kg)
M8-600 614 2284 94 25 32 4-500 72
M8-700 713 2623 101 25 32 4-400
M8-800 810 2399 126 20 25 4-400
M8-900 887 2624 134 20 25 3-350
M8-1000 1001 2363 147 16 20 3-300

Five star motor M8 performance:

Installation size:


Five star motor M8 product features:

1. Easy to install. (Common and special installation connection sizes are allowed)
2. The rotation direction of the output shaft can be adjusted in both forward and reverse directions. (The output shaft can withstand radial and axial external forces)
3. Less leakage and simple maintenance. (Adopting a compensable end face flow distribution structure)
4. High volumetric efficiency. (Using new technology to seal the piston and cylinder body)
5. Excellent low-speed stability performance. (Starting mechanical efficiency greater than 0.9)
6. The noise is very low. (Adopting a crankshaft and a five cylinder piston structure with low excitation frequency)
Instructions for using the five-star motor M8:
1. Please check the integrity of the hydraulic motor before use. If it has not been used continuously for a long time, please replace it with clean hydraulic oil and fill the chamber in a timely manner.
2. Random installation of hydraulic motors is allowed, but they must be coaxially connected to the load.
3. Before the first use, the hydraulic motor chamber must be filled with clean hydraulic oil, and the drain port should be placed on the highest horizontal line of the entire hydraulic motor. At the same time, the drain pipe should directly lead to the oil tank.
4. Recommended industrial filtration accuracy is 25 microns. In special working conditions, the filtration accuracy can also be 75 microns, and the viscosity must be ensured to be between 15-1000cs.
5. To extend the service life, it is necessary to avoid radial and axial external force loads on the output bearing as early as possible.

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!