Hebei Jizhou Fiberglass Group Co., Ltd
Home>Products>Fiberglass insulated rod
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    19903186079
  • Address
    Economic Development Zone, Jizhou City, Hebei Province
Contact Now
Fiberglass insulated rod
Fiberglass insulated rod
Product details

    Fiberglass insulated rod

    . The product is widely used in composite products such as silicone composite insulators, pillars, mold supports, drop switches, isolation switches, and electrified railway pillars. The company can produce 1-4mm epoxy pull rods for optical use for users. The product complies with relevant standards such as JB5892-91 and IEC.
    1、 Product factory requirements
    1. There are no cracks or fissures on the surface or inside, and each rod has a uniform color (light yellow or light green).
    2. Able to withstand mechanical processing such as sawing, milling, planing, drilling, and turning.
    3. Internal threads can be tapped with a tap, while external threads can be ground, but cannot withstand large loads
    2、 Nominal diameter deviation (mm)
    Nominal diameter Deviation value
    ф6-ф18 ±0.05
    ф22-ф35 ±0.05
    ф38-ф55 +0.12
    -0.05
    ф60-ф80 +0.20
    0
    ф85-ф120 +0.25
    -0.10

    3、 Physical and mechanical properties
    Serial Number Experimental project Item unit Acid resistant type Ordinary type
    1 density Density g /cm3 >2.2 >2.0
    2 Water absorption rate% hydro-scopicity % 0.02 0.05
    3 tensile strength Tension strength Mpa 1680 1326
    4 bending strength Bending strength Mpa 965 900
    5 Hot bending strength
    Mpa/150℃
    Hot and bent strength Mpa ≥300 ≥260
    6 Red absorption test Fuchsine test min >20 >20
    7 Volume resistivity Electric resistance Ω.m ≥1010 ≥1010
    8 Water diffusion experiment Water difiusion test mA ≤0.03 ≤0.03
    9 compressive strength Compression strength Mpa 965 912
    10 fiber content Fibre content % >75 >75
    11 Inter layer cutting strength shearing strength Mpa 65 58
    12 Power frequency breakdown voltage A.C.break down voltage KV/cm >50 >50
    13 Full wave impulse voltage Total current impulse voltage KV/cm >95 ≥94.5
    14 stress corrosion Stress corrosion h ≥96

    Online inquiry
    • Contacts
    • Company
    • Telephone
    • Email
    • WeChat
    • Verification Code
    • Message Content

    Successful operation!

    Successful operation!

    Successful operation!