JF-A160 Bottle Sorting Machine

The motor drives the bottle sorting flower tray through gear transmission. The bottles in the bottle hopper are rotated from the bottom to the top of the sorting tray through the semi-circular groove of the sorting tray. The bottles in the semi-circular groove are sorted by the flipping plate of the sorting mechanism, and the bottles with the bottle mouth facing downwards and the bottle bottom facing upwards are automatically flipped to complete the sorting. Adjust the speed between the storage bin and the bottle sorting bin to maintain a certain number of bottles for bottle sorting

JF-8 ElectronicsCounting machine

The bottle blocking device on the bottle conveying track of the bottle conveying mechanism will block the bottles conveyed by the previous equipment at the bottling position and wait for filling. The drugs enter the medicine compartment in an orderly manner through the vibration of the feeding corrugated plate. A counting photoelectric sensor is installed on the medicine compartment, and the drugs that fall into the compartment are quantitatively counted by the photoelectric counting sensor and then loaded into bottles at the bottling position.

JF-C120 desiccant stuffing machine

The bottle blocking cylinder on the bottle conveying track of the bottle conveying mechanism will block the bottles conveyed by the previous equipment at the position for filling the desiccant, waiting for the desiccant to be filled, and align the bottle mouth with the cutting mechanism. The stepper motor drives the bag feeding mechanism to pull out the desiccant bag from the desiccant bag tray. The color code sensor detects the desiccant bag and controls its length. Scissors cut the desiccant bag and load it into a bottle. The conveyor belt of the bottle conveying mechanism transports the already loaded desiccant bottles to the next equipment. At the same time, the bottles to be filled with desiccant are replenished to the position where the desiccant bag is loaded.

JF-D902 capping machine

The bottle cap manager organizes the cap mechanism, and the upward facing bottle caps are continuously sent to the cap dropping track. The bottles transported from other equipment on the assembly line to the bottle feeding track enter the cap dropping area. When the bottles are clamped and moved forward by the bottle clamping devices on both sides, the cap is automatically put on. The capping device first presses the cap to a pre tightened state before capping, and under the action of three pairs of high-speed rotating wear-resistant rubber wheels, the cap is tightly screwed onto the bottle body.

JF-2 Electromagnetic Aluminum Foil Sealing Machine

The bottle containing aluminum foil passes under the induction head, and the aluminum foil is heated by the energy generated by the induction head. The heated aluminum foil melts the plastic film compounded on the aluminum foil and tightly adheres to the bottle mouth, achieving a sealing effect.

JF-201 self-adhesive round bottle side labeling machine

The bottles that need to be labeled are transported through the bottle feeding track, and the bottles are pulled apart at equal distances by the bottle distance adjustment mechanism. The photoelectric sensor senses the passing bottles, sends a signal, and the transmission system is activated to start labeling. The tensioning system tightens the label paper tape, and after the coding machine is used for coding, the label paper positioning photoelectric sensor positions the label paper according to the length of the label paper, so that the length of one label paper pulled out is equal. Under the action of the labeling and pressing components, the label paper automatically peels off and is smoothly attached to the required position of the bottle, completing the entire labeling process.