ELTRA's CS-580 is an ideal carbon and sulfur analyzer for simultaneous determination of organic samples.
Samples up to 500mg or more, even non-uniform materials, can be reliably analyzed. The maximum temperature of the horizontal resistance furnace and ceramic tube can reach 1550 ℃, which can be adjusted by 1 ℃. The analyzer can be equipped with four independent infrared detection tanks according to user requirements, which can detect most organic compounds
All samples are applicable.

ELTRA's CS-580A analyzer (A=automatic loader) is equipped with an automatic sampler that can analyze large amounts of samples without the need for an operator. The sampler has 36 crucibles and 130 crucibles.

The CS-580A series is a vertical resistance furnace and ceramic tube technology based on the CS-580 analyzer, with a maximum heating temperature of 1550 ℃ and an adjustable temperature of 1 ℃. Samples weighing up to 500mg and even uneven materials can be reliably analyzed. This analyzer can be equipped with up to four infrared detection cells according to user requirements, thus meeting various applications.

Application examples

oil, soot, Soil, dust, waste, building materials, plant materials, rubber, sand, tobacco, coke, coal, limestone, gypsum ..

advantage

• Simultaneously measure the carbon and sulfur content of small samples

• Elemental analysis for organic samples

• Fast, accurate, and reliable analysis

• The maximum combustion temperature of the horizontal resistance furnace is 1550 ℃, adjustable at 1 ℃

• Customizable measurement range

• Using a gold-plated detection cell can effectively prevent corrosion of the detection cell when analyzing samples containing halogens or acids.

• Powerful software features (multilingual, customizable display, output results)

• Single point and multi-point calibration

• Simultaneously calibrate carbon and sulfur

• maintenance-free

• Sturdy construction, suitable for laboratory and production control

performance index

mechanism

CS-580 operation
After weighing the sample, it is placed in a ceramic sample boat, and the weight value is transmitted to the computer (or manually entered). Then, the sample boat is placed in a resistance furnace for combustion, with an average analysis time of 60 to 180 seconds. The detector signal and instrument parameters can be displayed during the analysis process.
The evaluation of the final signal and the display of the analysis results will be automatically completed, and the data can be transmitted to the Laboratory Information Management (LIMS). The CS-580 only requires maintenance of the dust removal and filtration device and chemicals, and is very easy to operate and complete.

CS-580A operation
CS-580A involves loading the sample into a crucible and then using a pair of pliers to place the sample onto the base of an automatic loader, allowing the sample to continuously burn in the furnace. The average analysis time is 60 to 120 seconds, and both detector signals and instrument parameters can be displayed during the analysis process. The evaluation of the final signal and the display of the analysis results will be automatically completed; The data can be transmitted to the Laboratory Information Management System (LIMS). This series only requires maintenance for dust removal and filtration devices and chemicals, and is very easy to operate and complete.

measuring principle
The sample of CS-580 was burned in an oxygen atmosphere at a temperature of up to 1550 ℃. The temperature inside the furnace can be freely selected to gradually increase or decrease by 1 ℃. The combustion gases (carbon dioxide, water, sulfur dioxide) from the furnace first pass through a particulate filter and then enter the heated H₂O
Infrared pool. Afterwards, it is a dry gas that chemically absorbs water vapor, carbon dioxide, and sulfur dioxide. Four or infrared pools can be configured as needed.