The ELTRA CW-800M analyzer can analyze carbon and water content in a single measurement. It is an update based on mature technology of CW-800, providing rapid adjustment of furnace temperature. Samples of carbon and water with different components can provide measurements of different furnace temperatures. The precise design of ELTRA CW-800M analyzer for simultaneous determination of carbon (CO)₂Release) and water, lime, gypsum, and cement, with a scale of up to 100% (depending on the weight of the sample). It can also be applied to ores, soils, minerals, slag, and waste materials.

Each application can provide up to 5 heating settings. The temperature level and duration can be set, with a maximum temperature of up to 1000 degrees. Depending on the application, both oxygen and inert gases such as nitrogen can be used as furnace atmospheres. ELTRA's CW-800M measurement system has extremely high sensitivity, strong reliability, and long service life. Customization can be made according to customer requirements. Two independent infrared detection pools for high-precision CO detection₂And H₂O measurement.

Application examples

Soil, waste, cement, slag, limestone, gypsum, minerals, ores

advantage

• Carbon dioxide and water can be measured simultaneously with a small amount of sample

• No additional acid is required to determine TOC (total organic carbon) and TIC (total inorganic carbon)

• Fast, accurate, and reliable analysis

• Wide analysis scope

• The maximum temperature of the resistance furnace can reach 1000 ° C, with 1 ° C adjustable

• Up to five sets of heating temperatures can be set

• Customizable measurement range

• Using a gold-plated detection cell can effectively prevent corrosion of the detection cell when analyzing samples containing halogens or acids.

• Powerful software features (multilingual, customizable display, output results)

• Single point and multi-point calibration

• No need for halogen scavenger

• Electronic gas flow control

• maintenance-free

• Sturdy construction, suitable for laboratory and production control

performance index

mechanism

CW-800M is easy and convenient to operate. After weighing the samples of the quartz boat, they are placed in the loader in the furnace. According to the program set by the user, different temperatures and carrier gases are used to heat and release CO₂Water is detected by an infrared detection pool. The received "chromatography" immediately displays the carbon and water of different sample segments. All data processing, combustion process control, and calculation results are displayed on the computer. The length of measurement time depends on the user's settings. Common analysis takes about 20 minutes.