VIP member
Electronic single seat electric control valve
Product Name: Electronic Single Seat Electric Regulating Valve Product Introduction:
Product details
| HBZDL(P)series Electronic single seat electric control valve |
|
| Product Features | Valve body parameters | |
|
Superior structure: equal cross-section low flow resistance channel, large rated flow coefficient |
nominal pressure PN10、PN16、PN40、PN64 | |
| Good adjustability: large adjustable range, flow characteristics can be selected as equal percentage or linear | Connection method Flange type, (special: welded type) | |
| Good sealing performance: can choose soft seal or corrugated pipe seal to improve sealing performance | body material WCB、SS304、SS316、SS316L | |
| Widely used: various valve seat structures, heat sinks, suitable for different pressure differentials and temperatures | Valve core material SS、SS304、SS316、SS316L、 Sitailai welding | |
| Technical Parameter | Sealing material PTFE、 Hard seal, special high-temperature material | |
| action Electric open type, electric closed type | Corrugated pipe SS、SS304、SS316 | |
| Valve seat structure P single seat | fill material Polytetrafluoroethylene, flexible graphite | |
| Traffic characteristics Equal percentage, linear | push pole Lining 2Cr13 | |
| Adjustable range 50：1 | put sth. under sth. else to raise it or make it level a flat Rubber asbestos board, 1Cr18Ni9Ti asbestos wrapped gasket | |
| Sealing gradeIII, IV, V, VI | Flange standard GB9113-88、JB/T79-94、GB2555-81 | |
| Basic error±2.5% | Specially made flangeANSI、JIS、DIN | |
| ambient temperature-30 ℃~+70 ℃ (Explosion proof type: -20 ℃~+60 ℃) | Fluid temperature | C3 group -20 ℃~200 ℃ |
| Input signal 4~20mA DC、0~10V DC | C4 group -40 ℃~250 ℃ | |
| output signal 4~20mA DC、0~10V DC | C5 group -40 ℃~450 ℃ | |
| supply voltage AC220V50HZ； 380V.AC 50Hz 24AC/DC | C7 group -60 ℃~450 ℃ | |
| Main technical parameters and performance indicators | |||||||||||||||
| Nominal diameter DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | ||||
| 10 | 12 | 15 | 20 | ||||||||||||
| Rated flow coefficient Kv | straight line | 1.8 | 2.8 | 4.4 | 6.9 | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 |
| Equal percentage | 1.6 | 2.5 | 4.0 | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | |
| Rated travel L (mm) | 16 | 25 | 40 | 60 | |||||||||||
| Allowable leakage amount | Single seat | Hard seal: Grade IV Soft seal: Grade VI | |||||||||||||
| sleeve | Hard seal: Grade II Soft seal: Grade VI | ||||||||||||||
| Environmental temperature for use | Electric control valve: ≤ 95% | ||||||||||||||
| The performance indicators of this product comply with GB/T4213-92. Technical parameters related to supporting electric actuators |
| Technical parameters related to supporting electric actuators | ||||||||||||
| Nominal diameter DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| Motor model | Common | ZAZ-60 DKZ-310 | ZAZ-60 DKZ-310 | DKZ-410 | DKZ-410 DKZ-510 | |||||||
| Electronic type | JHZAZ1 | JHZAZ2 | JHZAZ3 | JHZAZ3 | ||||||||
| Motor thrust (N) | Common | 400 4000 | 400 4000 | 6400 | 6400 16000 | |||||||
| Electronic type | 2000 | 4000 | 6000 | 8000 | ||||||||
| Full travel time (S) | Common | 12.5 | 20 | 32 | 48 | |||||||
| Electronic type | 30 | 30 | 48 | 60 | ||||||||
| Power consumption (W) | Common | 28 | 35 | |||||||||
| Electronic type | 6 | 15 | 25 | 40 | ||||||||
| Allowable pressure differenceElectric single seat regulating valve allows differential pressure gauge | ||||||||||||||
| Nominal diameter/thrust (N) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |||
| 10 | 12 | 15 | 20 | |||||||||||
| 400 | 3.90 | 2.71 | 1.71 | 0.95 | 0.62 | 0.37 | 0.24 | 0.15 | ||||||
| 2000 | 6.40 | 6.40 | 6.40 | 4.87 | 3.11 | |||||||||
| 4000 | 6.40 | 6.40 | 6.40 | 6.40 | 6.11 | 3.73 | 2.39 | 1.53 | ||||||
| 6000 | 1.38 | 0.91 | 0.54 | |||||||||||
| 6400 | 1.45 | 0.95 | 0.61 | 0.40 | 0.28 | 0.15 | ||||||||
| 8000 | 0.50 | 0.34 | 0.19 | |||||||||||
| 16000 | 0.98 | 0.68 | 0.38 | |||||||||||
| Dimensions and weight (ordinary type)Unit: mm | ||||||||||||
| Nominal diameter DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| A | 460 | 530 | 630 | |||||||||
| B | 230 | 230 | 260 | |||||||||
| H1 | 490 | 540 | 625 | |||||||||
| L | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |
| H2 | 175 | 180 | 215 | 218 | 230 | 280 | 285 | 315 | 400 | 460 | 540 | |
| H3 | 53 | 57.5 | 70 | 75 | 82.5 | 92.5 | 100 | 110 | 125 | 142.5 | 170 | |
| Weight kg | PN16/40 | 50 | 52 | 54 | 56 | 58 | 75 | 87 | 95 | 132 | 135 | 155 |
| PN64 | 53 | 56 | 58 | 65 | 68 | 84 | 110 | 129 | 177 | 180 | 210 | |
| Dimensions and weight (electronic type)Unit: mm | ||||||||||||
| Nominal diameter DN (mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| d | Φ155 | Φ162 | Φ170 | |||||||||
| H4 | 290 | 325 | 380 | |||||||||
| L | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |
| H5 | 175 | 180 | 215 | 218 | 230 | 280 | 285 | 315 | 400 | 460 | 540 | |
| H6 | 53 | 58 | 70 | 75 | 82 | 92 | 100 | 110 | 125 | 142 | 170 | |
| Weight kg | PN16/40 | 10 | 12 | 15 | 17 | 18 | 34 | 87 | 54 | 76 | 79 | 100 |
| PN64 | 13 | 16 | 19 | 26 | 27 | 43 | 100 | 85 | 12 | 125 | 150 | |
| remarks: |
| *Flange sealing surface types: PN10 and PN16 are convex, PN40 and PN64 are concave convex, and the valve body is concave. |
| *Structural length: According to GB12221-89 standard |
| *Jacket insulation type jacket heat carrier interface: butt weldingΦ18*4 |
| *The distance between the valve body flange and the flange end face can be manufactured according to the standard specified by the user. For example, ANSI, JIS, JPI and other standards. |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-