EQUOSTAT is a lightweight and powerful portable Rockwell hardness tester suitable for hardness testing of all metal materials.
EQUOSTAT uses a technology similar to the Rockwell measurement principle for hardness testing, applying a fixed testing force through the R5 probe.
According to the different test workpieces, EQUOSTAT is divided into clamp type, manual type, and desktop press type. |
|
Application:
- Small workpieces and other parts
- Easy to scratch and polish surface components
- Thin plates and components,
- Thin walled pipe fittings and other components (wall thickness ≤ 2mm)
- Hardness of weld heat affected zone
|
characteristic:
- Fast, precise, and highly repeatable
- No need for coupling agent coupling
- Can be used to test objects of any size and angle
- No need to select material curve
|
 
|
|
EQUISTAT testing principle |
|
|
Hardness value HRZ=200- (t1-t0)/0.8 resp=200-DD5/0.8
- The state after applying initial force
- The state after applying initial and additional forces
- The state after releasing the additional force
- Depth difference
|
 
|
| Digital display instrument EQUOTIP 2 |
|
-Hardness value HL (measured value)
-Maximum value (Max)
-Minimum value (Min)
-Difference range (R)
-Standard deviation (S)
-Mean value (HL)
-Conversion value
-Number of impacts |
|
| The monitor automatically recognizes the impact device connected and activates the detection function automatically. Users can set up display devices according to their own needs. |
|
|
Built in conversion
EQUOTIP: It can connect to all EQUOTIP impactors and can also input user-defined conversion units.
EQUOSTAT： Roche Z (HRZ) - Vickers (HV) - Brinell (HB) - Roche C (HBC) - Roche C (HRB)-
Vickers (HR15N) - Tensile strength (N/mm2)
|
|
The difference between EQUOSTAT and Leeb hardness tester:
|   |
EQUOSTAT |
EQUOTIP |
| Principle: |
Roche principle |
Richter's principle |
| Host: |
EQUOTIP 2 |
EQUOTIP 2 |
| Test direction: |
No need for correction |
Need to be corrected |
| Material selection: |
All metal materials |
Most metal materials require selection |
| Material thickness: |
0.2mm or above |
Above 25mm
Stable support is required below 25mm |
| Material weight: |
No requirements |
Over 5kg
Coupling is required for weights below 5kg |
| Accuracy: |
Only related to the depth of indentation |
Affected by factors such as material composition, surface hardening layer thickness, welding, magnetism, etc |
 
 
|
|
|
|
|
|
Can be used for small components and parts
|
Test different shapes and parts on various supports
|
|
|
|
|
Used for measuring surfaces
|
  |
|
|
Technical parameters:
- Measurement material: Metal material
- Test range: 20-195HRZ
- Measurement accuracy: ± 1.5HRZ (± 2.0HRC)
- Measurement thickness: maximum 26mm
- Pressure head material: Diamond
- Head taper: 80 °
- Data storage: 6000 sets
- Power supply: 6 LR6, 1.5V batteries (approximately 60 hours at 20 ℃) can be connected to 9V, 0.2A DC power
- Host size: 180 * 175 * 80mm
- Host weight: 800g
|
|
Technical specifications (EQUOSTAT R5 probe)
|
detection range
|
Roche (HRZ)
20-195
20-185
100-160
151-195
140-195
|
Equivalent to other hardness values
21-1003HV
20-69HB
27-107HRB
19-70HRC
58-94HR15N |
|
check the accuracy
|
1.5HRZ / 2.0HRC
|
|
Total testing power
|
50N
|
|
penetration depth
|
Soft material about 80 μ m
Soft material about 15 μ m
|
|
Test Head
|
Artificial gemstone, angle 80o
|
|
test
|
Thickness: Minimum 0.2mm or above
Outer diameter: minimum 3mm bolt
Inner diameter: minimum 116mm pipe
Surface roughness: N6，RA=0.8μm
Lining thickness: minimum above 0.1mm
|
|
Data Storage
|
6000 sets
|
|
Power Supply:
|
6 LR6, 1.5V batteries (approximately 60 hours at 20 ℃)
Can connect 9V, 0.2A DC power
|
|
Host size
|
180*175*80㎜
|
|
Weight
|
800g
|
|
|
|
|
 
Standard configuration：
| Clamp type standard configuration |
|
Small workpieces and parts inspection, measuring range 0.2-26mm
EQUITIP 2 digital display instrument
R5 probe and cable
Test pliers: measuring range 0.2-26mm
Z0 support specimen 0.2-8mm
Support kit: Z1: 8-17mm Z2: 17-26mm
Z3: Φ 3- Φ 8mm Z4:& gt Φ 10mm
Standard Rockwell test block: R1/HRC20 R2/HRC32,
R3/HRC56 R4/HRC65 optional |
| Manual standard configuration |
|
Thin plate measurement
EQUITIP 2 digital display instrument
R5 probe and cable
R-H plane support
Standard Rockwell test block
|
Measurement of thin-walled pipe fittings
EQUITIP 2 digital display instrument
R5 probe and cable
R-Z surface support
Optional based on curvature radius
R-Z 18-70mm or R-Z 70-00mm |
|
| Desktop press type |
|
EQUITIP 2 digital display instrument
R5 probe and cable
R-H plane support
Bench Press
Standard Rockwell test block |
|
|
|
