E-Cell Electrodeionization (EDI) System-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

Room 701, 7th Floor, Lee Garden Phase II, 28 Enping Road, Causeway Bay, Hong Kong

Contact Now

E-Cell Electrodeionization (EDI) System

Contact Supplier

More Products

Product details

overview

The E-Cell standard system is designed around four different basic models, but can flexibly adjust the number of stacks on the system to meet project capacity requirements. In addition, the flow range of the system takes into account the different dilution flow rates of each stack, which will be determined using Winflows software for EDI prediction to meet the water quality requirements of the project. For more information about specific stacks, please refer to the E-Cell Electrodeionization Stack page.

All systems can be upgraded to use the E-Cell MK-7 stack instead of the E-Cell-3X, which allows the system capacity to increase by approximately 40% at rated flow

	ECell3X-2	ECell3X-4	ECell3X-8	ECell3X-12
Number of stacks	1-2	3-4	5-8	10-12
Stack type	E-Cell-3X	E-Cell-3X	E-Cell-3X	E-Cell-3X
Nominal product flow	10 m³/h (44 gpm)	20 m³/h (88 gpm)	40 m³/h (176 gpm)	60 m³/h (264 gpm)
Product traffic range	3.4-12.7 m³/h (15-56 gpm)	10.2-25.4 m³/h (45-112 gpm)	17.0-50.9 m³/h (75-224 gpm)	34.0-76.3 m³/h (150-336 gpm)

The fact sheet is applicable to systems that have been pre designed for use in many parts of the world, as well as systems that meet specific EU requirements.

E-Cell-3X Standard System

E-Cell-3X EU Standard System

Suez also offers reverse osmosis single sled integrated with E-Cell EDI. More information can be found on the PRO E-Cell page.

characteristic

The E-Cell EDI standard system includes a complete set of equipment required for fast and efficient installation, including:

Power panel with DC drive
Single module current monitoring
Instrument package, including flow rate, resistivity/conductivity, and pressure transmitters
Programmable Logic Controller (PLC)
Human Machine Interface (HMI)
Optional water flow valve and programming

Winflows

Winflows is one of the most advanced reverse osmosis (RO) and EDI computing tools on the market. It can model RO and EDI as independent operating systems, but its uniqueness lies in its ability to model RO+EDI systems as combined processes within a single tool. This improves the convenience of use, as most EDI systems have upstream RO to ensure that the EDI system has sufficient water quality. Using a tool to make EDI calculations easier than ever before.

Winflows includes all the features of the E-Cell stack and can be used for calculations of any size. The Winflows software can be downloaded here.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content