Double groove lubricant foaming characteristic tester

●Brief introduction:
1）Compliant with ASTM D892, IP146; 2) Double groove lubricant foaming characteristic tester; 3) Microcomputer controller, PID function, digital display temperature;

● Technical features:
1) Compliant with ASTM D892, IP146;
2) Stainless steel frame with Pyrex tank body and lid, can fit and secure 2 cylinders without the need for steel rings to prevent floating. There are 2 precise flow meters and 1 control box containing all electronic components;
3) Stainless steel skeleton, can be tested at 24 ℃ and 93.5 ℃;
4) Aluminum lid with 2 holes for placing a cylinder, and a locking clip to secure the cylinder and thermometer sleeve;
5) Electronic heating bath pot with a stirrer on top;
6) Stainless steel heater;
7) Stainless steel refrigeration ring, when connected to a cooling water source, can control the bath temperature to 24 ℃, meeting the requirements of ASTM D892 serial number 1;
8) The precisely adjustable flow meter comes with a needle valve, support bracket, and exhaust connection. Can provide separate calibration certificates;
9) 4 exhausters, original Norton (aluminum spherical) or Mott (stainless steel cylindrical) with certain permeability and aperture;
10) Four 1000ml Pyrex cylinders with graduations, equipped with rubber plugs and air inlet and outlet pipes on top;
11) Microcomputer controller, PID function, digital temperature display (continuous display during testing), accuracy of 0.1 ° C, Pt100 RTD temperature probe;
12) The contact control box is very convenient;
13) English operation manual;
14) CE safety certification; Power supply: 220 V/50 Hz, 2200 W;
15) Dimensions LWH: 1050 x 420 x 680mm, weighing approximately 60Kg;
16) Mass flow controllers and software can also be optionally selected;
● Ordering information:
1) AD0892-200: Double slot lubricant foaming characteristic tester;
Accessories:
2) AD0892-A00: Wet testing meter, scale 0.02L;
3) AD0892-A01: Air pump;
4) AD0892-A02: Glass drying tower;
5) CAL001: PT100 simulator;
6) CAL002: Officially certified PT100 simulator;
Consumables:
7) AD0892-C00: Pyrex cylinder with scale;
8) AD0892-C01: The rubber plug is equipped with air inlet and outlet pipes;
9) AD0892-C02: Norton (aluminum ball shaped) exhaust;
10) AD0892-C03: Mott (stainless steel ball shaped) exhaust system;
11) TA012C-N00: ASTM 12C thermometer, ranging from -20 ° C to+102 ° C;