1、 CK6146D-Y ∠ 30 inclined bed lathe milling composite machine (46 turret+with Y-axis+4-side power head+4-side power head)- High configuration joinnumerical table

CKX6146D-Y (turret with Y-axis and power head turning milling composite machine) ∠ 30 inclined bed height configuration table
1	Main technical parameters
Serial Number	Project Name	unit	Project parameter table
※※	moving range
1	Maximum travel (X/Z/Y)	㎜	850/280/180(850/280/206)
2	Minimum setting unit (X/Z/Y)	㎜	0.001
3	Speed movement (X/Z/Y)	m/min	22/22/15 (30/30/15 optional)
※※	machine range
4	Swing over bed	㎜	Φ350
5	Maximum processing diameter for disk/shaft components	㎜	Φ310/φ100
6	Maximum processing outer circle length	㎜	230
7	maximum bar diameter	㎜	Φ45
※※	main shaft
8	Spindle end form		A2-5
9	Spindle speed series	level	not have
10	Spindle center height	mm	65
11	Main spindle speed range	r.p.m	45-4500 (design time: theoretical 6000-8000)
12	spindle bore	㎜	Φ56
※※	electrical machinery
13	Main motor power	kw	4.4/5.5 (optional)
14	feed motor	kw	1.3/1.5 (optional)
※※	cutting tool
15	Outer round square knife size	㎜	20×20
16	Internal boring tool size	㎜	φ20
17	Knife changing method		Rotating tower type tool change nearby
18	Tool change time	S	0.2
19	Tool change positioning accuracy		0.003
20	Maximum loading capacity of knife holder	grasp	Knife tower+Y-axis five axis power head (four sides and four ends)
※※	power head
21	Power head motor	kw	1.3
22	Power head speed		4000
23	Maximum clamping of power head	㎜	ER20/φ13
24	Maximum power head attack teeth	M	M8
※※	tailstock		(No)
25	Tail seat taper		M14
26	Tailstock sleeve		Φ70
27	Tail seat travel	㎜	100
※※	other
28	Repetitive positioning accuracy (X/Z/Y) at constant temperature	㎜	0.003
29	positioning accuracy	mm	0.005
30	Bed structure		45 degrees
31	The total installed capacity is approximately	kw	10
32	Net weight of machine tool	Kg	2900
33	Dimensions (length x width x height)	㎜	2160×1380×1850
II	Main Material List
1	spindle	China 3.7KW/5.5KW (Japan Yaskawa 4.4KW) servo motor
2	spindle bearing	Japanese original NSK or German FAG precision grade bearings - (optional according to product processing requirements)
3	Numerical Control System	Beijing KND, Taiwan Baoyuan, New Generation (note: optional Japanese Mitsubishi or Fanuc)
4	Servo system (driver+motor)	Japan Yaskawa 1.3KW/Maixin 1.5KW
5	X. Z-axis ball screw	Taiwan Yintai or Shangyin P3 class heavy-duty ball screw (diameter 32)
6	X. Z-axis linear guide	Taiwan Yintai or Shangyin P-type heavy-duty linear guide rail
7	X. Z-axis bearing	Japanese original NSK or German FAG precision grade bearings - (optional according to product processing requirements)
8	Knife holder form	Taiwan Jiasu eight station turret+2 power heads (Jiasu, Liuxin, Xinxin - optional)
9	Hydraulic rotary cylinder	Taiwan rotary oil cylinder
10	Hydraulic station	Taiwan variable oil pump, hydraulic motor, hydraulic solenoid valve+air cooling system
11	Computer lubrication system	river valley

IICK6146D-Y ∠ 30 inclined bed lathe milling composite machine (46 turret+with Y-axis+4-side power head+4-side power head)- High configuration Main Material List

（1）Main Material List 1：

CK6146D-Y ∠ 30 inclined bed lathe milling composite machine (46 turret+with Y-axis+4-side power head+4-side power head) -High end configuration table (new generation 21TB, X/Z motor, 1.3kw Yaskawa, Japan)
mechanical part
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	lathe bed	HT250	casting		1 unit
2	base	HT250	casting		1 set
3	saddle	HT250	casting		1 piece
4	Small drag board	HT250	casting		1 piece
5	HEADSTOCK	HT250	casting		1 piece
6	Spindle Pusen	PC160 sleeve type (using NSKP4 bearings)		Taiwan	1 item	Priority recommendation
**	Spindle Jianchun	PC150 socket A2-5 (NSKP4 bearing)		Taiwan	1 item	optional
**	Spindle Pin Jiang	A2-5 (Taiwan TPIP4 bearing)		Taiwan		optional
7	Spindle speed	Normal operating speed: 3000 revolutions per minute (processing speed can reach 4000-4500 revolutions per minute, theoretical design speed: 6000 revolutions per minute)
8	Spindle through-hole	Diameter 56- Pull rod through-hole diameter 46 (can pass through 45 bar material)
9	Screw rod	R32-10K3-558-736		Taiwan Shangyin	1 item
	Screw rod	R32-10K3-558-736		Taiwan Shangyin	1 item
10	Screw rod bearing	25TAC62		German fag	6 pieces
11	Track	HGH30CA760 (Z-axis maximum travel: 280mm)		Taiwan Shangyin	2 items
	Track	HGH25CA700 (maximum X-axis travel: 850mm)		Taiwan Shangyin	2 items
12	Y-axis power head (mechanical part)	4-side power head, 4-terminal power head		domestic	1 set
13	turret	8 workstations (optional 10 workstations)		Taiwan Liuxin	1 set	(Optional) Taiwan Jiasu
14	Rotary cylinder	Zhongyi		Taiwan	1 unit	Priority recommendation
***	Rotary cylinder	Qingxin, Jiahe		Taiwan		optional
15	shield				1 set
16	rack		welding		1 set	Optional (cast iron plus 5000 yuan)
17	Big hood				1 set
electric part
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	system	New generation 21TB		Taiwan	1 unit	New generation five axis system
2	Driver	Yaskawa, Japan		Yaskawa, Japan	2 units
3	Servo motor (X/Z-axis motor)	Japanese Yaskawa X/Z motor 1.3kw		Yaskawa, Japan	2 units
**	Servo motor (Y-axis motor)	Yaskawa, Japan 0.75KW		Yaskawa, Japan	1 unit
4	Servo spindle motor	Yaskawa Electric 4.4kw from Japan		Yaskawa, Japan	1 unit	optional
5	Hydraulic pump motor	Group power 0.75KW		Taiwan funded	1 unit
6	Electric lubrication pump	HL2202-210X 、BBE2232		Sino Japanese Joint Venture	1 unit	(Optional) Choose one from two options
7	Hydraulic variable displacement pump	Yili VP-20 (spline), Yisheng VP-20		Imported from Taiwan with original packaging	1 unit	(Optional) Choose one from two options
8	Foot switch				1 piece
Additional accessories
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	Single blade holder (long)				1 piece
2	Single blade holder (short)				1 piece
3	Double knife holder (short)				1 piece
4	Double knife holder (long)				1 piece
5	Drilling tool holder (center drill)				2 of them
6	Drill chuck (extension rod)				1 set
7	Shrinking sleeve (shaft head)				1 piece
8	Zuozui				2 of them
9	pull rod				1 item
10	system specification				1 book
11	toolbox	Attached: 9 hexagonal keys Bored: 8-19:5			1 piece

2）Main Material List 2：

CK6146D-Y ∠ 30 inclined bed lathe milling composite machine (46 turret+with Y-axis+4-side power head+4-side power head) -High end configuration table (new generation 21TB, X/Z motor new generation/Maixin 1.5kw)
mechanical part
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	lathe bed	HT250	casting		1 unit
2	base	HT250	casting		1 set
3	saddle	HT250	casting		1 piece
4	Small drag board	HT250	casting		1 piece
5	HEADSTOCK	HT250	casting		1 piece
6	Spindle Pusen	PC160 sleeve type (using NSKP4 bearings)		Taiwan	1 item	Priority recommendation
**	Spindle Jianchun	PC150 socket A2-5 (NSKP4 bearing)		Taiwan	1 item	optional
**	Spindle Pin Jiang	A2-5 (Taiwan TPIP4 bearing)		Taiwan		optional
7	Spindle speed	Normal operating speed: 3000 revolutions per minute (processing speed can reach 4000-4500 revolutions per minute, theoretical design speed: 6000 revolutions per minute)
8	Spindle through-hole	Diameter 56- Pull rod through-hole diameter 46 (can pass through 45 bar material)
9	Screw rod	R32-10K3-558-736		Taiwan Shangyin	1 item
	Screw rod	R32-10K3-558-736		Taiwan Shangyin	1 item
10	Screw rod bearing	25TAC62		German fag	6 pieces
11	Track	HGH30CA760 (Z-axis maximum travel: 280mm)		Taiwan Shangyin	2 items
	Track	HGH25CA700 (maximum X-axis travel: 850mm)		Taiwan Shangyin	2 items
12	Y-axis power head (mechanical part)	4-side power head, 4-terminal power head		domestic	1 set
13	turret	8 workstations (optional 10 workstations)		Taiwan Liuxin	1 set	(Optional) Taiwan Jiasu
14	Rotary cylinder	Zhongyi		Taiwan	1 unit	Priority recommendation
***	Rotary cylinder	Qingxin, Jiahe		Taiwan		optional
15	shield				1 set
16	rack		welding		1 set	Optional (cast iron plus 5000 yuan)
17	Big hood				1 set
electric part
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	system	New generation 21TB		Taiwan	1 unit	New generation five axis system
2	Driver	New generation/Maixin		Taiwan	2 units
3	Servo motor (X/Z-axis motor)	New generation/Maixin X/Z motor 1.5kw		Taiwan	2 units
**	Servo motor (Y-axis motor)	New generation/Maixin motor 1.0-1.5kw		Taiwan	2 units
4	Servo spindle motor	New generation 5.5KW		Taiwan	1 unit
5	Hydraulic pump motor	Group power 0.75KW		Taiwan funded	1 unit
6	Electric lubrication pump	HL2202-210X 、BBE2232		Sino Japanese Joint Venture	1 unit	(Optional) Choose one from two options
7	Hydraulic variable displacement pump	Yili VP-20 (spline), Yisheng VP-20		Imported from Taiwan with original packaging	1 unit	(Optional) Choose one from two options
8	Foot switch				1 piece
Additional accessories
Serial Number	Name	Model number	Material	Origin	number	Remarks
1	Single blade holder (long)				1 piece
2	Single blade holder (short)				1 piece
3	Double knife holder (short)				1 piece
4	Double knife holder (long)				1 piece
5	Drilling tool holder (center drill)				2 of them
6	Drill chuck (extension rod)				1 set
7	Shrinking sleeve (shaft head)				1 piece
8	Zuozui				2 of them
9	pull rod				1 item
10	system specification				1 book
11	toolbox	Attached: 9 hexagonal keys Bored: 8-19:5			1 piece

3）Main Material List Three：

CK6146D-Y ∠ 30 inclined bed lathe milling composite machine (46 turret+with Y-axis+4-side power head+4-side power head) -High end configuration table (Baoyuan 568 five axis system, X/Z motor Maixin 1.5kw)
mechanical part
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	lathe bed	HT250	casting		1 unit
2	base	HT250	casting		1 set
3	saddle	HT250	casting		1 piece
4	Small drag board	HT250	casting		1 piece
5	HEADSTOCK	HT250	casting		1 piece
6	Spindle Pusen	PC160 sleeve type (using NSKP4 bearings)		Taiwan	1 item	Priority recommendation
**	Spindle Jianchun	PC150 socket A2-5 (NSKP4 bearing)		Taiwan	1 item	optional
**	Spindle Pin Jiang	A2-5 (Taiwan TPIP4 bearing)		Taiwan		optional
7	Spindle speed	Normal operating speed: 3000 revolutions per minute (processing speed can reach 4000-4500 revolutions per minute, theoretical design speed: 6000 revolutions per minute)
8	Spindle through-hole	Diameter 56- Pull rod through-hole diameter 46 (can pass through 45 bar material)
9	Screw rod	R32-10K3-558-736		Taiwan Shangyin	1 item
	Screw rod	R32-10K3-558-736		Taiwan Shangyin	1 item
10	Screw rod bearing	25TAC62		German fag	6 pieces
11	Track	HGH30CA760 (Z-axis maximum travel: 280mm)		Taiwan Shangyin	2 items
	Track	HGH25CA700 (maximum X-axis travel: 850mm)		Taiwan Shangyin	2 items
12	Y-axis power head (mechanical part)	4-side power head, 4-terminal power head		domestic	1 set
13	turret	8 workstations (optional 10 workstations)		Taiwan Liuxin	1 set	(Optional) Taiwan Jiasu
14	Rotary cylinder	Zhongyi		Taiwan	1 unit	Priority recommendation
***	Rotary cylinder	Qingxin, Jiahe		Taiwan		optional
15	shield				1 set
16	rack		welding		1 set	Optional (cast iron plus 5000 yuan)
17	Big hood				1 set
electric part
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	system	Baoyuan 568 (Five Axis System)		Taiwan	1 unit
2	Driver	Maixin		Taiwan funded	2 units
3	Servo motor (X/Z-axis motor)	Maixin X/Z motor 1.5kw		Taiwan funded	2 units
**	Servo motor (Y-axis motor)	Maixin Motor 1.0kw		Taiwan funded	1 unit
4	Servo spindle motor	Super synchronous motor 5.5kw		Beijing	1 unit
5	Hydraulic pump motor	Group power 0.75KW		Taiwan funded	1 unit
6	Electric lubrication pump	HL2202-210X 、BBE2232		Sino Japanese Joint Venture	1 unit	(Optional) Choose one from two options
7	Hydraulic variable displacement pump	Yili VP-20 (spline), Yisheng VP-20		Imported from Taiwan with original packaging	1 unit	(Optional) Choose one from two options
8	Foot switch				1 piece
Additional accessories
Serial Number	Name	Model number	Material	Origin	quantity	Remarks
1	Single blade holder (long)				1 piece
2	Single blade holder (short)				1 piece
3	Double knife holder (short)				1 piece
4	Double knife holder (long)				1 piece
5	Drilling tool holder (center drill)				2 of them
6	Drill chuck (extension rod)				1 set
7	Shrinking sleeve (shaft head)				1 piece
8	Zuozui				2 of them
9	pull rod				1 item
10	system specification				1 book
11	toolbox	Attached: 9 hexagonal keys Bored: 8-19:5			1 piece

IIICK6146D-Y ∠ 30 inclined bed lathe milling composite machine (46 turret+with Y-axis+4-side power head+4-side power head)- High configuration

Structural characteristics of machine tools

Construction and features of machine tool structure

Suitable for heavy loads and continuous cutting, it can maintain long-term high precision and high-quality surface roughness.

■High precision, high rigidity, heavy-duty spindle.

The spindle adoptsOriginal imported NSK or FAG P4 precision grade spindle bearings from Japan or GermanyThrough engineering calculations and analysis, an optimized span configuration has been achieved, coupled with a unique maze style waterproof design and a heat dissipation plate spindle box design, which can achieve better waterproof and dustproof effects. The use of high-tech lubrication technology and high rigidity sleeve structure demonstrates better stability, ensuring greater axial rigidity, radial rigidity, and machining accuracy. Using a dedicated spindle motor and imported frequency converter, it achieves large-scale automatic stepless speed regulation. The entire spindle is produced by a professional spindle manufacturer in Taiwan, Pusen.The main shaft bearings are arranged in a front three and back two arrangementCan better withstand stronger impacts. The spindle design speed can reach 8000rpm/min.

■Good rigidity, easy operation and chip removal.

High strength, bed tilted at 45 °, made of high-quality cast iron resin sand molding, and subjected to secondary annealing treatment to ensure casting stability. The tight ribbed structure has good rigidity and strong seismic resistance. The inclined placement of the large drag plate and tool holder makes the operation and chip removal of the machine tool very convenient, and occupies a small area with good comfort.

■Imported Taiwan Shangyin or Yintai P-type linear slide rails with high rigidity, high precision, and high speed, C3 precision ball screw, and dedicated Japanese NSK/German FAG screw bearings. The two ends of the screw rod are pre pulled according to the machining center, resulting in higher rigidity.

The two axis transmission is directly connected by a servo motor and a precision ball screw through an elastic coupling, with good force conditions and high positioning accuracy. Equipped with a computerized automatic lubrication system for forced lubrication of linear guides and ball screws. The X-axis and Z-axis adopt high rigidity linear sliding rails, and the optimized span between tracks is calculated, with low resistance, high rigidity, and high precision. The displacement speed can reach 18-30m/min, improving work efficiency and shortening processing time.

■Hydraulic stationUsing Taiwanese quantitative pumps, hydraulic motors, solenoid valves, and equipped with air cooling devices, the noise level is low and the oil temperature is low.

■ AdoptingTaiwan Six Xin Eight Station Hydraulic Rotary Knife TowerHigh positioning accuracy, low failure rate, fast tool change, and nearest tool change.

■ Adopting beautifulFully enclosed protective coverGood waterproof performance. The activity door opens easily and effortlessly.

The control system and spindle motor adopt servo spindle, and are equipped with two axis radial or axial servo power heads. It can achieve 360 degree arbitrary indexing and positioning of the spindle, as well as drilling, tapping, and milling functions. (Note: Different models have different requirements, and different power options can be selected)Head)

The machine tool lighting adopts explosion-proof, long-life, high brightness LED energy-saving lamps. The cooling pump adopts a large displacement cooling pump imported from Taiwan.

The base can be made of integral castings, which have high strength and good seismic resistance, and are more suitable for environments with large temperature differences in the north(Different types of castings are available.)Select).

The base can be made of integral castings, which have high strength and good seismic resistance, and are more suitable for environments with large temperature differences in the north

(Note:Different casting modelsItem can beselect）.

The base can be made of integral castings, which have high strength and good seismic resistance, and are more suitable for environments with large temperature differences in the north

(The following picture shows the casting part)

Decomposition diagram) - for reference only, assembly of the entire machine is based on actual engineering drawings