1Aotai produces and sells coating thickness gauges | Coating thickness gauges detect thicknessAT-2012 Coating Thickness GaugeApplication scope:

The coating thickness gauge instrument adopts the magnetic thickness measurement method, which can conveniently and non destructively measure the thickness of non-magnetic coatings on ferromagnetic materials, such as zinc, copper, chromium and other coatings on steel surfaces or coatings such as paint, enamel, fiberglass, spray coating, asphalt, etc. This instrument is widely used in industries such as machinery, automotive, shipbuilding, petroleum, chemical, electroplating, spraying, enamel, plastics, etc.

Aotai produces and sells coating thickness gauges | Coating thickness gauges detect thicknessworking principle:

AT-2012 Coating Thickness GaugeMeasure the thickness of the coating layer using electromagnetic induction method. The probe located on the surface of the component generates a closed magnetic circuit, which will change to varying degrees as the distance between the probe and the ferromagnetic material changes, causing changes in magnetic resistance and probe coil inductance. This principle can be used to accurately measure the distance between the probe and the ferromagnetic material, that is, the thickness of the coating layer.

II，AT-2012 Coating Thickness GaugeProduct Performance

1. Measurement range: 0-5000um

2. Measurement error:<3% ± 1um

3. Zui small indication: 1um

4. Display mode: 4-digit LCD digital display

5，AT-2012 Coating Thickness GaugeMain functions:

（1）. Measurement: Full range thickness measurement with a single probe

（2）. Storage and deletion: It can store 600 measurement data, delete individual suspicious data in the measurement, or delete all data in the storage area.

（3）. Read: Read the stored measurement data

（4）. Statistics: There are three statistical measures, with the mean being the highest and the lowest

（5）. Calibration: System calibration can be performed

（6）. Battery level: Equipped with undervoltage display function

（7）. Printing: capable of printing measurement values, optional micro printer

（8）. Shutdown: There are two methods: automatic shutdown and manual shutdown

6AT-2012 Coating Thickness GaugePower supply: Two 1.5V batteries

7. Power consumption: Maximum power consumption of 100mw

8. Dimensions: 51mm * 126mm * 27mm

9. Weight: 160g (including battery)

10. Operating environment temperature: 0 ℃~+40 ℃ Relative humidity: not exceeding 90%

11. The minimum thickness of the substrate: 0.5mm

12. Diameter of the smallest plane of the substrate: 7mm

13. Zui small curvature radius: convex: 1.5mm concave: 6mm

14. Under voltage indication: displayed in the upper right corner

*Critical thickness is small: When the iron-based thickness of the workpiece is greater than 1mm, the measurement of the coating (plating) thickness is not affected by the iron-based thickness

III，AT-2012 Coating Thickness GaugeConfiguration sheet

1. One AT-2012 coating thickness gauge

2. Two 7th batteries

3. 1 probe

4. 1 box of standard samples

5. 1 small aluminum box

6. 1 set of instruction manual and certificate of conformity

AT-2012 Coating Thickness GaugeOptional accessories:

1. 1 set of printer and communication printing cable

2. 1 disk of microcomputer communication software

3. Internal anti-corrosion probe