Fine activated carbon flash dryercharacteristic

1. Wet activated carbon (fine carbon) can complete drying and collection operations within 5 seconds.

   2. It can efficiently separate impurities such as sand from regenerated carbon.

   
   

   3. After mixing and exchanging heat between the dry medium and activated carbon, the exhaust temperature of the activated carbon should not be too deep or too fine,

   
   

   4. Activated carbon has a good drying environment under negative pressure and does not produce dust.

   
   

   If coal is used as the drying fuel, there will be no smoke emissions during the entire drying process, which meets environmental protection requirements. (Steam, natural gas, biomass, liquefied gas, etc. can also be used as dry heat sources).

   
   

   6. The moisture content of activated carbon dry products can reach 10%, and can also be adjusted within a certain range according to requirements.

   
   

   7. This device is made of all stainless steel material and will not increase the content of iron ions or heavy metal ions.

   
   

   8. This equipment is designed reasonably, with few malfunctions during the production process and easy maintenance.

   
   

   9. The thermal utilization rate of the equipment is ≥ 90% (higher than other dry welding methods).

Fine activated carbon flash dryerproduction process