Ideal methods for environmental monitoring and wastewater detection

COD reagents are divided into three ranges

Can be used in conjunction with AQUAfast IV colorimeter

Provide reagents for use with AQUAFast IV and AQUAFast II AQ2040 COD colorimeters. The reagent is divided into three ranges (0-150 mg/L, 0-1500 mg/L, 0-15000 mg/L). These reagents can provide users with convenient and safe measurements. Meanwhile, the reagent meets the requirements of EPA for COD measurement

COD measurement range:
0-150mg/L,0-1500mg/L,0-15000mg/L
Detection limit:
1.5mg/L, 15mg/L,150mg/L
Monitor:
Photodiode
Wavelength:
420520580610 automatic selection
Colorimetric tube size:
13mm,16mm,24mm
Measurement unit:
mg/L,ppm, Absorbance, transmittance
Dustproof and Waterproof:
IP67
AQUAFast COD165 Dissolver Technical Parameters
Power supply: 100~220 V/50~60 Hz
Power: 400 W
Weight: 3.6 kg
Size: 155 x 95 x 275 mm
Temperature regulation: P. I.D. Microelectronic Controller
Temperature sensor: Pt100 (Grade A)
Optional digestion temperature: 100 ℃，120 ℃，150 ℃，160 ℃，165℃
Optional digestion time: 30-60-120- unlimited minutes
Heating time: 10 minutes (20-165 ℃)
Temperature stability: ± 0.5 ℃
Temperature accuracy: ± 1℃
Dissolving pore diameter: 16mm x 25
Over temperature protection function: available