VIP member
56mm series gearbox stepper motor
□ 56mm series gearbox stepper motor ● Flange size (□): 56mm ● Step angle: 1.8 ゜ ● Current/phase: 2-4.2A ● Reduction ratio: 3-20 ● Lead out wire: 4, 6
Product details
| Outline Drawing(Single pole coil) |
This external diagram shows an eccentric gearbox stepper motor, Part of it is an eccentric gearbox;
We can customize the electrical parameters of the stepper motor according to your needs, and also add power-off brakes, encoders, etc;
When installing the stepper motor, it is necessary to use the front end cover of the motor to install the stopper positioning, and pay attention to the tolerance fit to strictly ensure the concentricity between the output shaft of the stepper motor and the load.
| Outline Drawing(Bipolar coil) |
This external diagram shows an eccentric gearbox stepper motor, Part of it is an eccentric gearbox;
We can customize the electrical parameters of the stepper motor according to your needs, and also add power-off brakes, encoders, etc;
When installing the stepper motor, it is necessary to use the front end cover of the motor to install the stopper positioning, and pay attention to the tolerance fit to strictly ensure the concentricity between the output shaft of the stepper motor and the load.
| 56mm series |
model |
External dimensions |
Weight (kg) (including gearbox) |
|||
L(mm) | |||||
YSD254-XXX |
41 |
0.85 |
|||
YSD255-XXX |
51 |
1.05 |
|||
YSD256-XXX |
56 |
1.1 |
|||
YSD258-XXX |
76 |
1.4 |
| Technical parameters of gearbox |
reduction ratio |
3 |
3.6 |
5 |
6 |
7.5 |
10 |
12.5 |
15 |
20 |
||
Gearbox level |
1 |
2 |
|||||||||
L（mm） |
32 |
42 |
|||||||||
Double gap (゜) |
2 |
||||||||||
| Technical parameters (single pole coil) |
|
stepping motor model |
Driver model |
electric current /Xiang |
resistance /Xiang |
inductance /Xiang |
static moment |
lead wire |
rotor inertia |
weight (including gearbox) |
Fuselage Length |
|
uniaxial |
|
A |
Ω |
mH |
kg-cm |
|
g-cm2 |
Kg |
L(mm) |
|
YSD254-DA6-GB□ |
SEA2D34 |
2 |
1.4 |
1.4 |
3.9 |
6 |
120 |
0.85 |
41 |
|
YSD255-DA6-GB□ |
3 |
0.74 |
0.9 |
7.2 |
6 |
275 |
1.05 |
51 |
||
YSD256-DA6-GB□ |
3 |
0.75 |
1.1 |
9 |
6 |
300 |
1.1 |
56 |
||
YSD258-DA6-GB□ |
3 |
1 |
1.6 |
13.5 |
6 |
480 |
1.4 |
76 |
||
The □ in the stepper motor model is the numerical value of the reduction ratio.
※ For other special specifications, please negotiate with Yingshida Electromechanical or agents.
| Technical parameters (bipolar coil) |
|
stepping motor model |
Driver model |
electric current /Xiang |
resistance /Xiang |
inductance /Xiang |
static moment |
lead wire |
rotor inertia |
weight (including gearbox) |
Fuselage Length |
|
uniaxial |
|
A |
Ω |
mH |
kg-cm |
|
g-cm2 |
Kg |
L(mm) |
|
YSD254-DA4-GB□ |
SEA2M44 |
3 |
0.55 |
1.2 |
5.5 |
4 |
150 |
0.85 |
41 |
|
YSD255-DA4-GB□ |
3 |
0.7 |
2 |
9 |
4 |
190 |
1.05 |
51 |
||
YSD256-DA4-GB□ |
4.2 |
0.4 |
1.2 |
11 |
4 |
280 |
1.1 |
56 |
||
YSD258-DA4-GB□ |
4.2 |
0.6 |
1.8 |
18 |
4 |
440 |
1.4 |
76 |
||
The □ in the stepper motor model is the numerical value of the reduction ratio.
※ For other special specifications, please negotiate with Yingshida Electromechanical or agents.
| Customized interface method |
|
|
|
||
|
42mm series Mazda interface: Moles 89401-1160 Lead end interface: Moles 87369-1100 |
42mm series Mazda interface: JST S6B-PH-K Lead end interface: JST PHR-6 |
□ 56mm series Mazda interface: JST S6B-FH Lead end interface: JST PHR-6 |
||
|
|
|
||
|
□ 56mm □ 60mm series Mazda interface: JST S11B-XH-A-1 Lead end interface: JST XHP-11 |
□ 56mm series Mazda interface: JST S6B-XH-A-1 Lead end interface: JST XHP-6 |
60mm series Mazda interface: JST S7B-XH-A-1 Lead end interface: JST XHP-7 |
| Technical Parameter |
project |
Technical Parameter |
step angle |
1.8゜ |
step angle accuracy |
± 5% (whole step, no load) |
Resistance accuracy |
±10% |
Inductance accuracy |
±20% |
temperature rise |
80 ℃ Max (rated current, two phase AC) |
ambient temperature |
-20℃~+50℃ |
insulation resistance |
100MΩ Min500VDC |
pressure resistance |
500V AC for one minute |
Radial clearance |
0.02Max (450g load) |
axial clearance |
0.08Max (450g load) |
Maximum radial load |
75N (20mm from the flange surface) |
Maximum axial load |
15N |
| application area |
Woodworking carving machine, laser engraving machine, marking machine, labeling machine, solidification machine, wire bonding machine, UV printer, 3D printer, inkjet printer, plotter, embroidery machine, glue dispensing machine, glue filling machine, soldering machine, BGA repair table, bonding machine, surface mounting machine, hot press machine, backlight laminating machine, coating machine, reciprocating machine, terminal machine, wire stripping machine, winding machine, solder paste printing machine, PCB drilling machine, V-CUT machine, shooting machine, FPC reinforcement machine, coating machine, laminating machine, IC sorting machine, IC burning machine, tape weaving machine, medical equipment, non-standard equipment, XYZ measuring instrument, connector assembly machine, SMT peripheral equipment, etc
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-