4S-O2 Electrochemical Oxygen Sensor
4S-O2 Electrochemical Oxygen Sensor
Product details
product details
The electrochemical 4S-O2 oxygen sensor is based on the principle of electrochemistry, which uses the measured gas to undergo corresponding oxidation-reduction reactions and release charges on the working electrode and counter electrode of the sensor, and forms a current through an external circuit. The magnitude of the current is proportional to the gas concentration, thus achieving quantitative measurement of the target gas.
Sensor characteristics
Low power consumption, high precision, high sensitivity, wide linear range, strong anti-interference ability, excellent repeatability and stability.
Main applications
Widely applicable for oxygen concentration detection in the industrial field.
TECHNICAL INDEX
performance | output | Output in 20.9% O2 (µ A) | 80~120 |
reaction time | T90 time from 20.9% to 0% O2 (s) | < 15 | |
Zero current | Output in N2 (µ A) | < 2.5 | |
Linearity | Oxygen deviation percentage at 10% O2 | 0.6 | |
lifetime | Output drift | Percentage change in output over 3 months | < 1 |
working life | Months with output reduced to 20.9% O2 and original output of 85% | > 24 | |
environment | Humidity sensitivity | Oxygen change percentage: 0~95% RH, 40 ° C | < 0.7 |
CO2 sensitivity | Percentage change in oxygen reading/CO2 concentration at 5% CO2 | 0.1 | |
pressure sensitivity | Percentage change in output/percentage change in pressure at 20kPa | < 0.1 | |
key parameter | temperature range | ℃ | -30~55 |
Pressure Range | kPa | 80~120 | |
Humidity range | Continuous relative humidity percentage (short-term 0~99% RH) | 5~95 | |
Storage period | Storage months at 3-20 ℃ (to be stored in a sealed container, open circuit) | 6 | |
load resistance | Ω (recommended) | 47~100 | |
diameter | Mm (including label) | 20 | |
height | Mm (including foam washer) | 17.4 | |
weight | g | < 16 |
Note: Product parameters are subject to change without prior notice
Online inquiry