VIP member
□ 35mm series closed-loop stepper motor
□ 35mm series closed-loop stepper motor ● Flange size (□): 35mm ● Step angle: 1.8 ゜ ● Current/phase: 1.5A ● Static distance: 2~4kg-cm ● Body length: 4
Product details
| Outline Drawing |
This external design is for a single axis product;
We can customize the electrical parameters of the closed-loop stepper motor according to your needs, and also add planetary gearboxes, power-off brakes, etc;
When installing the closed-loop stepper motor, it is necessary to use the front end cover of the motor to install the stopper positioning, and pay attention to the tolerance fit to strictly ensure the concentricity between the output shaft of the closed-loop stepper motor and the load.
| technical parameter |
|
stepping motor model |
Driver model |
electric current /Xiang |
resistance /Xiang |
inductance /Xiang |
static moment |
lead wire |
rotor inertia |
weight |
Fuselage Length (including encoder) |
|
uniaxial |
|
A |
Ω |
mH |
kg-cm |
|
g-cm2 |
Kg |
L(mm) |
|
YSD223-DA4-E |
SEB2M25 |
1.5 |
1.2 |
1.2 |
2 |
4 |
18 |
0.2 |
48 |
|
YSD224-DA4-E |
1.5 |
1.4 |
1.6 |
3.2 |
4 |
26 |
0.25 |
56 |
||
YSD225-DA4-E |
1.5 |
2 |
2.2 |
4 |
4 |
35 |
0.33 |
69 |
||
※ For other special specifications, please negotiate with Yingshida Electromechanical or agents.
| Moment frequency curve graph |
The moment frequency curve graph is based on the measurement conditions of our company. When the conditions change, the moment frequency curve graph may also change.
Due to different driver conditions, the closed-loop stepper motor may experience significant heating. To protect the encoder, please use it when the temperature of the closed-loop stepper motor casing is below 85 ℃.
|
|
|
|
| Option |
Motor power line:
model |
Length L (m) |
Conductor (m ㎡) |
SEB-PC050-01E |
1 |
0.5 |
SEB-PC050-02E |
2 |
|
SEB-PC050-03E |
3 |
|
SEB-PC050-04E |
4 |
|
SEB-PC050-05E |
5 |
|
SEB-PC050-07E |
7 |
|
…… |
…… |
|
SEB-PC050-10E |
10 |
The 10 million times ultra-high flexible drag chain cable used for connecting the closed-loop stepper motor and driver with a pressed connector.
The wiring distance between the closed-loop stepper motor and the driver should be controlled below 10m.
Motor encoder cable:
model |
Length L (m) |
Conductor (m ㎡) |
SEB-EC020-01E |
1 |
0.2 |
SEB-EC020-02E |
2 |
|
SEB-EC020-03E |
3 |
|
SEB-EC020-04E |
4 |
|
SEB-ED020-05E |
5 |
|
SEB-EC020-07E |
7 |
|
…… |
…… |
|
SEB-EC020-10E |
10 |
The 10 million times ultra-high flexible drag chain cable used for connecting the closed-loop stepper motor and driver with a pressed connector.
The wiring distance between the closed-loop stepper motor and the driver should be controlled below 10m.
| Cable precautions |
|
|
|
|
When plugging or unplugging connectors, be sure to grip the connector for operation. If the cable is pulled for operation, it may cause poor contact. |
Do not bend the cable of the connector part. If stress is applied to the connection part or terminal, it may cause poor contact or disconnection. Please fix the two red connector parts to prevent them from shaking and causing damage or poor contact of the terminals. |
|
|
|
|
|
When inserting the connector: Please hold the connector body and insert it straight. If inserted obliquely, it may cause terminal damage or poor contact. When unplugging the connector: Please first release the buckle of the connector and then pull it out straight. If you hold the cable and pull it out, it may cause damage to the connector. |
Please use appropriate length for wiring to avoid pulling the cable when it moves. In addition, please ensure that the bending radius R is above the cable diameter of 6. |
| Customized shaft production method |
|
|
|
|
|||
shaft |
Single flat wire |
Double flat wire |
Keyway |
|||
|
|
|
|
|||
knurling |
Gear hobbing |
through-hole |
hollow shaft |
|||
|
|
|
||||
threaded shaft |
gear |
timing pulley |
| Technical Parameter |
project |
Technical Parameter |
step angle |
1.8゜ |
step angle accuracy |
± 5% (whole step, no load) |
Resistance Accuracy |
±10% |
Inductance accuracy |
±20% |
temperature rise |
80 ℃ Max (rated current, two phase AC) |
ambient temperature |
-20℃~+50℃ |
insulation resistance |
100MΩ Min500VDC |
pressure resistance |
500V AC for one minute |
radial clearance |
0.02Max (450g load) |
axial clearance |
0.08Max (450g load) |
Maximum radial load |
28N (20mm from the flange surface) |
Maximum axial load |
10N |
| application area |
Woodworking carving machine, laser engraving machine, marking machine, labeling machine, solidification machine, wire bonding machine, UV printer, 3D printer, inkjet printer, plotter, embroidery machine, glue dispensing machine, glue filling machine, soldering machine, BGA repair table, bonding machine, surface mounting machine, hot press machine, backlight laminating machine, coating machine, reciprocating machine, terminal machine, wire stripping machine, winding machine, solder paste printing machine, PCB drilling machine, V-CUT machine, shooting machine, FPC reinforcement machine, coating machine, laminating machine, IC sorting machine, IC burning machine, tape weaving machine, medical equipment, non-standard equipment, XYZ measuring instrument, connector assembly machine, SMT peripheral equipment, etc
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-